BARR 544 Traffic Barrier Kit - (2m - 6m)
- Model: BARR 544
- Product Code: Select the length options required below
- Availability: In Stock
Kit Includes: 1x Operator, Barrier Body & Control board, 1x Aluminium Boom (100mmx66mm), 1x Set of LED's, 1x LED Flashlight, 1x 8K2 Safety Edge, 1x Balancing Spring, 1x Boom Inlet, 1x Set of Plastic Covers for Inlet & Boom End, 1x Unlocking Device with Personalised Key.
Please Note: Shipping is up to 2-7 working days from point of order.
If additional items contained within your basket will incur delivery charges based on their weight. These charges may be waived at GIBIDI UK's discretion, post order, if they can be sent on the same pallet.
Please also note that due to the complexities of shipping, barrier items are not able to be returned.
NB: The BARR 544 is also available as a 'basic boom barrier kit'. Please contact us for details.
Electromechanical traffic barrier in 24Vdc, with 2m-5.7m passage width. For intensive use.
EASY TO INSTALL
Thanks to adjustable anchorage system and the elevated position of the control unit, the BARR 544 represents a hassle free installation.
SILENT AND FAST
The BARR 544 is virtually silent during operation, and has a standard opening time of five seconds. If a swifter alternative is required, please refer to the BARR 546 for an opening time of 1.8 seconds.
TECHNOLOGICALLY ADVANCED
The BARR 544 has a variety of features including; master/slave management, integrated traffic-light system, programmable safety device connections, and many others. The transmission wheel is manufactured from pressed and heat treated steel. The anti-crushing detection is integrated and can be adjusted as denoted by EN 12453.
A COMPLETE & RELIABLE RANGE
The BARR 544 can be utilised for passages from 2m to 5.7m and represents an aesthetically pleasing solution. The manufacturing process includes only the highest quality materials, providing both longevity and reliability over the lifespan of the product.
LENGTH OPTIONS 2m to 5.7m
| Technical Features | |
| Absorbed Power | 150W |
| Adjustable Thrust | Yes |
| Boom Length | Max. 6m |
| Deceleration Function | Yes |
| Encoder/Limit Switches | Limit Switches O/C |
| Frequency of Use | 50% H24 |
| Mode of Balancing | Compression Spring |
| Motor Power Supply | 24Vdc |
| Opening Time | 5 sec |
| Operating Temp | -20C / +60C |
| Protection Level | IP55 (IP67 for the operator) |
| Type of Use | Intensive |
| Weight of Unit | 45Kg |
Product Code: A90925P
Power supply for the BR24 Control unit. This is a 24Vdc control unit which is suitable for the BARR ..
Product Code: AJ01130
This kit allows you to change a straight barrier arm into an articulated arm. Note: only visible ite..
Product Code: Please select
BARR Balancing Springs (For 2m - 5.7m Arms)..
BARR 544 Datasheet
Request Further Information